Ceiling

We have now completed insulating our ceiling area and lining it with light weight 3mm aluminium composite sheets, edging, joiners all held up with Sikaflex 221.

Ceiling Insulation

Foamex StyReflex with alloy foil layer in 40mm has an R rating of 1.10

http://www.foamex.com.au/polystyrene-products/styreflex

"... Designed and developed by Foamex, StyReflex™ is a clean, lightweight, non-sagging, non-irritant foil insulation sheet. Made from expanded polystyrene which has been foil laminated...  allowing for greater R-values to be obtained in open and confined spaces....
StyReflex is very cost effective and will not deteriorate, collapse, or lose thermal values over time. .."

Curved ceiling edge insulation

Fitted and sealed with expanding foam and taped up with insulation tape

Fridge / Microwave cabinet

Work has begun on finishing the Refrigerator / Microwave / Hot water system cabinet

The solar powered refrigerator exhaust fan was mounted

Duct work was started underneath and behind where the fridge will sit and one side  wall was insulated.

A vent was worked into the removable lower front panel as was the house battery master switch.

Microwave and fridge trial fitted with cabinet trim piece

TV Cabinet Wall

The bathroom wall has been reinforced, a TV extension arm added, light switch added and lined with some Gunnersens lightweight matt white ply

Side entry slide out step

A manually operated slide out step assembly rated to 200kg was sourced and fitted to the main side entry door way to avoid the use of temporary plastic steps.

Bathroom Wall / Door

In order to finish our "Hugo" bathroom module, we are utilising an inner 3mm skin of Gunnersens WallArt in gloss white which is an alternative to the commonly used Laminex Aquapanel and an outer skin of Gunnersens 3mm lightweight ply/vinyl in a matt white finish,
As the bathroom door was designed for a 26mm frame, a 20mm ply/styrofoam sandwich was created in between both panels.

Wall fitted to bathroom module and door test fitted in opening whilst awaiting door frame from powder coating

Completed wall and door assembly with powder coated u channel surrounding the door frame

Outside foldout table

We have fitted a fold out table to the side of our motorhome